TNT Sports

List of contents in this article:

• 1, How to turn on the headlights of the car???
• 2、How to switch on and off car headlights
• 3, Where is the car headlight switch
• 4、How to turn on the headlights of the car
• 5, Car light button position illustration

How to turn on the headlights of the car???

The high beam and low beam switches of the car are on the light switch assembly on the left side of the steering wheel, and the knob can turn on and off the low beam; pull the fork to turn off the high beam. The headlight switch controls the front and rear fog lights, width indicator lights and low beam lights.

Turn on the turn signal: (with the steering wheel as the standard) lever (whole) turns clockwise to turn the right turn signal;Turn the lever counterclockwise to the left turn signal; high and low beam switching: first turn the "low beam" pattern to the on position, and the low beam light is turned on.

Twise the left light control switch forward to turn it into a small light. Turn it twice for the low beam. Push the light control lever forward for the high beam. Lift the light control lever forward to turn the right turn signal.

How to turn on the headlights of the car: to turn on the low beam, turn on the headlight switch to the position of the low beam; turn on the high beam and turn forward and keep the high beam on; turn inward, and the high and low beam flash. The switch of car headlight cleaning and windshield cleaning are together.

Open the door on this side of the cab. Step on the brake pedal. Press the one-button start button to start the engine. The dashboard lights up, which proves that the engine has been started.Just turn the headlight switch.

How to switch on car headlights

Car high beam and low beam switch on the left side of the steering wheel On the assembly, the knob can turn on and off the low beam; turn the fork to turn off the high beam. The headlight switch controls the front and rear fog lights, width indicator lights and low beam lights.

The first method is the knob-type control switch. The knob-type control switch needs to be placed clockwise on the light gear that needs to be turned on. The operation method of the knob control switch is simple. After turning on, the light can be turned on normally. When closing, you can turn the knob in the opposite direction and turn it to the closing position.

Turn signal on: (based on the steering wheel) the lever (whole) turns clockwise to the right turn signal; the lever turns counterclockwise to the left turn signal; high and low beam switching: first turn the "low beam" pattern to the on position, and the low beam light is turned on.

Knob control switch: The knob control switch needs to be placed on the light gear that needs to be turned on in a clockwise manner. The operation method of the knob control switch is simple. After turning on, the light can be turned on normally.When closing, you can turn the knob in the opposite direction and turn it to the closing position.

It is opened by the knob, and the vehicle's light switch can be turned on by directly rotating the knob. The first gear is the width indicator light, the second gear is the low beam, and the high beam is controlled by the light combination control switch, which is located behind the left side of the steering wheel of the vehicle.

Where is the headlight switch of the car

1. Turn the left light control switch forward as a small light. Turn it twice for the low beam. Push the light control lever forward for the high beam. Lift the light control lever forward to turn the right turn signal.

2. Generally, at the bottom right of the steering wheel of the vehicle, there is a rotary button that rotates up and down. The lights are divided into low beam, high beam, fog light, warning light, indicator light, width indicator light and reversing indicator light.

3. Car light switches are basically integrated into the lever switch on the left side of the steering wheel, but there are exceptions. The light switches of some models are knob-type. As long as you turn it to or dial it to the designated position, the corresponding exterior light will be on, and the dashboard will also light up the corresponding sign.

How to turn on the headlights of the car

1. Generally speaking, there are two types of car light switches, one is lever type and the other is knob type. At present, it is mainly the lever type. You can see the diagram of the car light switch above. , the functions of each image are marked separately. When you turn on one of the lights, the dashboard will also turn on the corresponding indicator light.

2. Turn the left light control switch forward to make a small light.Turn it twice for the low beam. Push the light control lever forward for the high beam. Lift the light control lever forward to turn the right turn signal.

3. How to turn on the headlights of the car. Turn on the low beam. To turn on the headlight switch to the position of the low beam, turn on the high beam and turn the high beam forward. Always turn on the high beam and turn it inward. The high and low beams flash. The switches of the car's headlight cleaning and front windshield cleaning are the car's headlights are mainly used for driving at night. For high-light and near-light, it's me.

Car light button position diagram

1. Generally speaking, there are two types of car light switches, one is lever type and the other is knob type. At present, it is mainly lever type, and you can see the car lights above. OpenThe illustration is marked with the functions of each image. When you turn on one of the lights, the dashboard will also light up the corresponding indicator light.

2. The lights of the car are as follows: headlights/headlights, twist the switch to the position in the figure. The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.

3. Headlights/headlights, twist the switch to the position in the picture. The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.

4. The knob-type light switch is shown in the figure. Rotate the light switch knob to the corresponding position to turn on the running lights or high beams.The front and rear fog lights are turned on separately by buttons. 03 The lever light switch is shown in the figure. In the foggy weather, we must turn on the running lights and the front and rear fog lights, and turn on the low beams if necessary.

5. Illustration of the knob-type car light switch Illustration of the roof light switch The operation of the roof light switch is relatively simple. When the light button in the car is in the middle position, the car will automatically light up when the door is opened, and it can also be manually operated through the left and right buttons.