Walletinvestor digi plus

List of the catalog of this article:

• 1,How to deal with the dead machine at the door of Anjubao
• 2、Anjubao access control system issuing card sector password error
• 3、Walletinvestor digi plusHow to unlock Anjubao Gate for others

How to deal with Anjubao door machine dead

1. Or whether there is Walletinvestor digi plusa short circuit; handling method: if the two lights of the power supply are not on, the power cord should be connected correctly; or the fuse tube connected to the 220 input line is burned out and needs to be replaced.

2. Find Anjubao after-sales service or property for maintenance. If the intercom system of Anjubao Building is prone to faults, please find after-sales service personnel; small problems can be found in the technical support on the website.

3. Management machine failure. By querying the maintenance manual of Anjubao walkie-talkie, it is learned that when the management machine fails, any other walkie-talkie cannot be connected to the management machine, so multiple devices will not respond when contacting the management machine at the same time. It is necessary to contact the maintenance personnel as soon as possible to repair the management machine.

Anjubao access control system card issuing sector password error

1. Try to change the keyboard first, it doesn't work Follow the following method to crack the password! First of all, I forgot the BIOS password of the startup. How to solve it: If it is the BIOS password of the laptop, you can only find the dealer's after-sales service to solve it.

2. What do you want to ask if you forget the password of Anjubao parking system? Reinstall the system. If you forget the password of the Anjubao parking system, you need to use the system USB disk to make and reinstall the system to reset the password.

3. The solution to the password error of the brand's card sector is as follows: re-check the card.If the card is not authorized or the authorization information is inconsistent with the software, the card needs to be checked again. Replace the card reader: the connection to the card reader failed, and the card issuer could not be detected. The card reader needs to be replaced.

How to unlock Anjubao access control for others

First, install Anjubao access control and download the Anjubao app. Secondly, open the Anjubao app, mobile phone Bluetooth and Anjubao access control to pair. After the final pairing is successful, Anjubao's access control can be authorized.

Door card to open the door: Residents can use the access control card to swipe the card on the access control card reader. When the access control system verification is passed, the access control will automatically open. Password to open the door: The access control system can set password locks and other devices, and residents can enter the correct password to open the access control system.

Confirm that the door lock has been installed and connected to the Anjubao system. Install the Anjubao App on your mobile phone and log in with your account. In the Anjubao App, find the door lock device and click to enter the device control interface. On the device control interface, you can see the door opening button. Click the button to unlock it remotely.

In the black screen state, click to confirm and you will see the following interface. Move by left and right keys, select the last icon "System Settings", click to confirm, and enter the following interface. Select the last "unlock password" in the first row, click Confirm, and enter the password settings.

After reading the instruction manual, the instruction manual says, "0000+extinion number + password is specifically: after entering 0000 on the machine at the door, 0 is displayed on the LCD display.After 000, it will be automatically adjusted to a blank. You can enter the e-enst number, such as 0102, and then enter the default password 0000 to open the door.