DigiPlus Philippine

Engine water temperature sensor's role and DigiPlus Philippinetroubleshooting guide Engine water temperature sensor is an important part of the car engine cooling system. Its function is to measure engine water temperature and feedback data to the vehicle. Computer, so that the computer can adjust and control according to the temperature. The engine water temperature sensor is small, but its function is crucial. If it fails or is damaged, it will affect the normal operation of the engine and may lead to more serious consequences. The following will introduce the role of the engine water temperature sensor and troubleshooting guidelines to help car maintenance personnel or car owners better understand and deal with this problem. I. The function of the engine water temperature sensor The engine water temperature sensor is mainly responsible for measuring the engine water temperature and transmitting temperature information to the vehicle's computer.The water temperature sensor is usually located in the engine water tank, and its measurement method is to measure the temperature by thermal resistance. When the engine temperature rises, the water temperature sensor will sense the temperature rise and transmit this change to the computer. The computer can then adjust according to this information, such as increasing the speed of the vehicle, adjusting the amount of fuel injection and other adjustments. During driving, the vehicle's computer needs to constantly monitor the temperature changes of the engine to avoid overheating or overcooling of the engine, resulting in damage to engine parts. If the engine is overheated or too cold, the computer may take some actions, such as reducing the amount of fuel injection or increasing the speed of the radiator fan, to protect the engine. II. Troubleshooting Guide of Engine Water Temperature Sensor If the engine water temperature sensor fails or is damaged, the vehicle computer may receive inaccurate temperature information or cannot receive information at all.This will make it difficult for the computer to accurately control the function of the engine, which may cause the vehicle to fail, operate abnormally or even fail to start. Therefore, timely maintenance of engine water temperature sensors may bring some benefits. The following is the troubleshooting guide for engine water temperature sensor: 1. Check the thermometer of the engine: If you find that your thermometer shows too high or too low a temperature, you need to check whether the engine water temperature sensor is working properly. The inspection guide should start from your thermometer and dashboard, and compare the data with the data of the vehicle computer. Two. Check the water level in the cooling system: If you find that the water temperature gauge indicates that the engine is overheated, you need to troubleshoot it because the water level of the cooling system is insufficient. Therefore, checking the water level of the cooling system is an important step in troubleshooting.3. Check the sensor connection cable: If the water level in the cooling system is normal, it is likely that the engine water temperature sensor is faulty. At this time, it is necessary to check whether the connection cable of the sensor is intact. The inspection line should follow the specifications used by the manufacturer's vehicle. If the line is damaged or corroded, the sensor needs to be replaced in time. Four. Check the sensor power supply: If all the connection cables are checked and other problems are excluded, you need to check the sensor power supply to ensure that the sensor has the proper power supply. In some cases, the sensor may not be properly grounded or powered, which may cause the sensor to not work or send out the wrong information signal. 5. Replace the sensor: If no problems are found on all lines and the power supply also comes from the appropriate power supply, the sensor needs to be replaced.Before replacing the sensor, please pay attention to confirm the sensor model used in the current vehicle and its specifications. Summary: The engine water temperature sensor is an important part of the vehicle engine cooling system. If there is a failure, the vehicle will fail, operate abnormally or even fail to start. Therefore, we need to have a clear understanding and handling of the role and troubleshooting of the engine water temperature sensor. If you are not sure about your ability, please seek professional maintenance technicians or vehicle repair services.

Contact Us
Phone：020-83484617