DigiPlus

How to start the engine?DigiPlus Several ways to start the engine quickly. For many people, starting the engine can be a monotonous task, but for mechanics and automotive professionals, starting the engine is very important. Starting the engine is one of the basic skills that everyone needs to master, and starting the engine quickly is a convenient and fast way.In this article, we will introduce several ways to quickly start the engine to help you start the vehicle quickly in an emergency. The first way is to use the jumper starter. The jumper starter is a portable power supply that can provide a certain current when starting. The process of starting the engine with a jumper starter is very simple. You only need to connect the jumper starter to the car battery first, and then start the car to get a reliable power supply. If you need more power, you can use the second jumper starter to support the current. The second method is to use the push block launcher. Push block starter is a method of directly pushing the car up to start the engine. This method has no current output, but it can be used when the car battery is low or cannot be started. Two people are needed to operate, one operates the handbrake and clutch in the car, and the other pushes the car outside the car.If the push block starter operates correctly, the engine of the car will start and work normally. The third method is to use the motor starter. Motor starter, also known as "grid starter", is a method of directly cutting off the engine circuit and starting the car engine. This method is considered very dangerous and requires professional operation. When using this method, you must make sure that the engine has started and step on the clutch immediately when the engine is running, and the circuit will automatically recover. The fourth method is to use an air compressor. The use of air compressors is a traditional method suitable for cars that have been idle for a long time or when the temperature is low. In order to use this method, you need to use an air compressor to increase the pressure on the car. When starting, use air pressure to compress the air in the cylinder so that the car engine can start quickly and continue to run.In general, the above four methods are reliable ways to start the engine quickly. When using any method, you need to first understand the start-up process of the car, such as reaching the top speed, stopping, starting the engine, etc. In any case, ensuring safety is the most important thing. If you are not sure about any method or are facing an emergency, please seek professional help.

Contact Us
Phone：020-83484617