DigiPlus

List of the catalog of this article:

• 1, How to use the car cigarette lighter
• 2、How to repair the car cigarette lighter without power
• 3,DigiPlus How much is the current of the car cigarette lighter

How to use the car cigarette lighter

The usage of the car cigarette lighter is as follows: turn on the power supply of the car (some cars must The cigarette lighter power supply can only be used after the power is turned on). Plug the cigarette lighter into the power outlet. Plug the cigarette lighter into the car power outlet and press down to lock it.

Turn on the car power and plug the cigarette lighter into the car power outlet. And press and hold down to lock. When the temperature of the electric heating wire of the cigarette lighter is reached, it will automatically pop out, or wait 5-8 seconds for the electric heating wire to turn red. You can also pull it out manually. After lyinging the cigarette, put the cigarette lighter back to the power socket position.

Turn on the car power, plug the cigarette lighter into the car power socket, and press the lock (fixed).The cigarette lighter begins to heat up. When the temperature of the electric heating wire of the cigarette lighter reaches, it will automatically pop out, or wait for 5-8 seconds for the electric heating wire to turn red. You don't need to wait for it to pop up by itself, you can also pull it out manually. After lighting the cigarette, put the cigarette lighter back into the power socket.

The way to use the cigarette lighter on the car is to press the cigarette lighter and wait for a few seconds to pop up the cigarette lighter and light the cigarette. After use, the cigarette lighter should not be placed in the power supply port for a long time. It needs to be removed after use to prevent burning the cigarette lighter.

How to repair the car cigarette lighter without power

Check whether the power cord of the cigarette lighter is loose. If it is loose, you can connect the power cord again and fix it. , if the power still can't be connected, the next check will be carried out. Check whether the car cigarette lighter is installed correctly. If the installation is not correct, you can try to reinstall it. If it still does not power on normally, further check it.

If you find that the cigarette lighter in the car can't be energized, you can borrow a cigarette lighter of the same model to try to connect it. If it is normal, it is a problem with the lighter itself. We can replace it directly. If you can't use it, it's basically the fuse of the cigarette lighter. We can replace it by ourselves.

When repairing the unenergized cigarette lighter, the owner needs to check the cause of the failure of the cigarette lighter before repairing it.

The maintenance method of the car cigarette lighter is not energized: the first thing to consider is the contact problem. You can use electrical appliances to test and check whether the cigarette lighter is damaged. Use a mulmeter to test the contact power-on, and use the pass-through gear to check whether the line pass-through is good. If the line is good, the problem of the cigarette lighter itself can be ruled out.

The maintenance method for the cigarette lighter without power is: the owner can borrow the same model of cigarette lighter to try to connect it first. If it is normal, it is a problem with the cigarette lighter itself, and it can be replaced directly; if it cannot be used, it means that the fuse of the cigarette lighter is faulty.

How much is the current of the car cigarette lighter

The voltage of the general model cigarette lighter is 12V, the current is 10A, and the total power does not exceed 120W. However, due to the different voltages of different models, the voltage of special large transport vehicles is also 24V, and the current is 10A-20A.

The voltage and current of the general model of cigarette lighter is 12V, 10A, and the total power is less than 120W. However, due to the difference in voltage of different models, the voltage of special large transport vehicles also has a current of 24V and 10A-20A. Cigarette lighter voltage cigarette lighter is one of the car parts.

Small car 10A, big car 20A. The cigarette lighter is one of the car parts. The power of the electrical equipment equipped with the vehicle is 120W, and the voltage of the car is 12V, so the current is 10A.The total power of large transport vehicles is 240W and the voltage is 24V, so the current is 20A, and the on-board inverter can be configured to convert the current to charge electronic devices.

The voltage of the car cigarette lighter is 12 volts, and the current is 15 or 20 amps. The output voltage of the car cigarette lighter interface is 12v, and the maximum output current is 15 amps or 20 amps. The traditional cigarette lighter is to take electricity from the electric heating units such as metal electric heating sheets or metal electric heating wires from the automobile power supply as a source of cigarettes.